Drivers and Installation
- How do I install the drivers for my Tiger / Regit I card?
- How do I install the drivers for my Regit II card?
- I am trying to restore my backup of the registry layout settings from the install and am receiving an error.
Analyzer
- How do I save/replay transcap data?
- What is Overload?
- What is Auto Range?
- What is the Damping Factor, on the Acquisition Panel, when selecting Force/Impact window?
- What do the different status panel colors indicate in Analyzer?
- What is Overlap Processing?
- How do I get Burst Random output in Analyzer?
Classical Shock
- What do the different status panel colors indicate in Classical Shock?
- How are the compensation and comp usage buttons used in Classical Shock?
Multi-Ref Modal Acquisition
- What do the different status panel colors indicate in Multi-Ref Modal Acquisition?
- How do I perform a simple amplitude check?
Random
- What are Random's definition and testing Overall Grms Limits?
- How do I set the proper voltage range in Random?
- What is a monitor (or auxiliary or control) channel?
- Why can't the drive (or monitor or control) channel be used in the transfer function H(f) table?
- In the random vibration control application, what is the "Prestored Drive" option and how is it used?
- What do the different status panel colors indicate in Random?
- What does the limit parameter 'Sigma Clipping' refer to?
Sine
- While running Sine, I am having timing problems with the test length and time reported in the status box and tagged data displays.
- How can I monitor the actual channel voltage levels during a sine vibration test?
- What start-up parameters during a Sine Analysis run are of most interest?
- What are the explanations for the various sine resonance dwell types?
- What is the entry in the channel table for dB Abort and db Reference used for?
Sine on Random
- What is the cause of messages Attenuator Error or Maximum Drive Exceeded?
- How should the sigma clipping level be set?
- What do the different status panel colors indicate?
- What does the Specialized Channel Processing Option apply to?
Shock Synthesis
- What is an SRS and how is it calculated?
- What do the different status panel colors indicate in Shock Synthesis?
- What is the Recalc Comp feature and how does it work?
Random on Random
- What do the different status panel colors indicate Random on Random?
Road Simulation
- Are the window settings forced to Hanning during system identification and None (Rectangle) during Replication, or is this handled by the system automatically?
- What do the different status panel colors indicate in Road Simulation?
Rotating Machinery
- How is the data handled?
- What is a gate?
- How are gates utilized?
- How does tacho processing work?
- What are the digitizing options (i.e. sampling types) available in RMA?
- How can the tracking sampling performance be optimized / What parameters affect the tracking accuracy?
- How is an order track calculated?
Spectral Comparisons and Leakage
- Why doesn't the spectral line (i.e. peak amplitude) for my sinusoidal input match the peak amplitude of the time domain signal?
Miscellaneous
- When running Puma.exe, nothing comes up but T40DataServer is running and "Puma.exe" shows up in the Windows Task Manager.
- I’ve recently changed some of my graphics settings and some of my spread sheets in the dialogs don’t look the same as they did.
- After I upgraded my Puma software or while running SetupWizard, Puma and or GraphTool crashes on execution.
- Why is it that some of my Puma documents are no longer registered types associated with Puma and Windows uses the wrong default program for execution of these files?
- I have a Puma that is on the network and if the network cable is unplugged or the network connection goes down I get a "Hardware Server Error."
- When running Puma, the application never shows up or I get a error in the file occmgr.cpp.
- Data files are corrupt when using Active X Automation either remotely or locally.
Cougar
- Problems with "Universal Plug and Play" installed under Windows XP.
- When using Windows 2000/XP, I cannot install the Magma Cardbus drivers because the device manager tells me that I do not have enough resources to run this device.
GraphTool
- When running a 3D graph such as a stacked plot, why do I have problems with the display or error messages?
- When using a stacked plot graph, GraphTool crashes when selecting type 'Landscape'.
- When running GraphTool, the application never shows up or I get a error in the file occmgr.cpp.
- I am trying to restore my backup of the registry layout settings from the install and am receiving an error.
Puma Export Manager
- A file that exists on my computer isn't showing up in the Puma Export browser window.